Dell XPS 630 Owner'S Manual Download Page 20

Page: 20 / 168

About Your Computer

Front-Panel Connectors

power supply test
switch

Used to test the power supply.

power supply
diagnostic LED

Indicates power availability for power supply.

• Green light — Indicates power availability for power supply.

• No light — Indicates no power available for the power

supply or the power supply is not working. For more
information, see "Power Lights" on page 89.

card slots

Access connectors for any installed PCI or PCI Express cards.

NOTE:

Some connector slots support full-length cards.

back I/O
connectors

Plug USB and other devices into the appropriate
connectors (see "Back-Panel Connectors" on page 21).

power connector

Insert the power cable. The appearance of this connector
may differ from what is pictured.

book.book Page 20 Friday, April 25, 2008 3:58 PM

Summary of Contents for XPS 630









































































































































































Search results

Summary of Contents for XPS 630

Reviews:

Related manuals for XPS 630

Brands by name

Popular brands

Dell XPS 630, Owner'S Manual

Search results

Summary of Contents for XPS 630

Reviews:

Related manuals for XPS 630

Brands by name

Popular brands