manualshive.com logo in svg

Dell XPS 630, Owner'S Manual, Page: 66 / 168

Share
Download
Dell XPS 630 Owner'S Manual Download Page 66

66

Using Multimedia

1

Inspect the media card to determine the proper orientation for insertion.

2

Slide the media card into the appropriate slot of the media card reader 
until it is completely seated in the connector.

3

If you encounter resistance, remove the card, check for proper 
orientation, and then try again.

Instructions for Setting Up a Device With Bluetooth Wireless 
Technology

1

Turn on the device. 

2

Press the connect button on the device.

The Bluetooth LED on the device blinks, indicating that the device is 
active and can be detected by the computer.

3

Press the connect button on the front of the media card reader.

4

The Bluetooth LED on the device stops blinking and stays on for a few 
moments indicating that the connection between the device and the 
computer has been established. The LED then turns off.

book.book  Page 66  Friday, April 25, 2008  3:58 PM

Summary of Contents for XPS 630









































































































































































Reviews:

No comments