Dell S3048-ON, Configuration Manual

Page: 765 / 1036

Protocol Overview
Network management stations use SNMP to retrieve or alter management data from network elements.
A datum of management information is called a managed object ; the value of a managed object can be static or variable. Network elements
store managed objects in a database called a management information base (MIB).
MIBs are hierarchically structured and use object identifiers to address managed objects, but managed objects also have a textual name
called an
object descriptor .
You can download the latest MIB files from the following path:
• https://www.force10networks.com/CSPortal20/Main/SupportMain.aspx .
Implementation Information
The following describes SNMP implementation information.
• Dell Networking OS supports SNMP version 1 as defined by RFC 1155, 1157, and 1212, SNMP version 2c as defined by RFC 1901, and
SNMP version 3 as defined by RFC 2571.
• Dell Networking OS supports up to 16 trap receivers.
• Dell Networking OS implementation of the sFlow MIB supports sFlow configuration via SNMP sets.
• SNMP traps for the spanning tree protocol (STP) and multiple spanning tree protocol (MSTP) state changes are based on BRIDGE
MIB (RFC 1483) for STP and IEEE 802.1 draft ruzin-mstp-mib-02 for MSTP.
SNMPv3 Compliance With FIPS
SNMPv3 is compliant with the Federal information processing standard (FIPS) cryptography standard. The Advanced Encryption Standard
(AES) Cipher Feedback (CFB) 128-bit encryption algorithm is in compliance with RFC 3826. SNMPv3 provides multiple authentication and
privacy options for user configuration. A subset of these options are the FIPS-approved algorithms: HMAC-SHA1-96 for authentication and
AES128-CFB for privacy. The other options are not FIPS-approved algorithms because of known security weaknesses. The AES128-CFB
privacy option is supported and is compliant with RFC 3826.
The SNMPv3 feature also uses a FIPS-validated cryptographic module for all of its cryptographic operations when the system is configured
with the
fips mode enable
command in Global Configuration mode. When the FIPS mode is enabled on the system, SNMPv3
operates in a FIPS-compliant manner, and only the FIPS-approved algorithm options are available for SNMPv3 user configuration. When
the FIPS mode is disabled on the system, all options are available for SNMPv3 user configuration.
The following table describes the authentication and privacy options that can be configured when the FIPS mode is enabled or disabled:
Table 71. Authentication and Privacy Options
FIPS Mode Privacy Options Authentication Options
Disabled des56 (DES56-CBC)
aes128 (AES128-CFB)
md5 (HMAC-MD5-96)
sha (HMAC-SHA1-96)
Enabled aes128 (AES128-CFB) sha (HMAC-SHA1-96)
To enable security for SNMP packets transferred between the server and the client, you can use the
snmp-server user username
group groupname 3 auth authentication-type auth-password priv aes128 priv-password
command to specify
that AES-CFB 128 encryption algorithm needs to be used.
Dell(conf)#snmp-server user snmpguy snmpmon 3 auth sha AArt61wq priv aes128 jntRR59a
Simple Network Management Protocol (SNMP) 765