Dell S3048-ON, Configuration Manual

Page: 721 / 1036

Example of Enabling SSH Password Authentication
To view your SSH configuration, use the
show ip ssh
command from EXEC Privilege mode.
Dell(conf)#ip ssh server enable
Dell(conf)#ip ssh password-authentication enable
Dell# show ip ssh
SSH server : enabled.
SSH server version : v1 and v2.
SSH server vrf : default.
SSH server ciphers : 3des-cbc,aes128-cbc,aes192-cbc,aes256-cbc,aes128-ctr,aes192-
ctr,aes256-ctr.
SSH server macs : hmac-md5,hmac-md5-96,hmac-sha1,hmac-sha1-96,hmac-sha2-256,hmac-
sha2-256-96.
SSH server kex algorithms : diffie-hellman-group-exchange-sha1,diffie-hellman-group1-
sha1,diffie-hellman-group14-sha1.
Password Authentication : enabled.
Hostbased Authentication : disabled.
RSA Authentication : disabled.
Vty Encryption HMAC Remote IP
Using RSA Authentication of SSH
The following procedure authenticates an SSH client based on an RSA key using RSA authentication. This method uses SSH version 2.
1 On the SSH client (Unix machine), generate an RSA key, as shown in the following example.
2 Copy the public key id_rsa.pub to the Dell Networking system.
3 Disable password authentication if enabled.
CONFIGURATION mode
no ip ssh password-authentication enable
4 Enable RSA authentication in SSH.
CONFIGURATION Mode
ip ssh rsa-authentication enable
5 Install user’s public key for RSA authentication in SSH.
EXEC Privilege Mode
ip ssh rsa-authentication my-authorized-keys flash: //public_key
Example of Generating RSA Keys
admin@Unix_client#ssh-keygen -t rsa
Generating public/private rsa key pair.
Enter file in which to save the key (/home/admin/.ssh/id_rsa):
/home/admin/.ssh/id_rsa already exists.
Overwrite (y/n)? y
Enter passphrase (empty for no passphrase):
Enter same passphrase again:
Your identification has been saved in /home/admin/.ssh/id_rsa.
Your public key has been saved in /home/admin/.ssh/id_rsa.pub.
Configuring Host-Based SSH Authentication
Authenticate a particular host. This method uses SSH version 2.
To configure host-based authentication, use the following commands.
1 Configure RSA Authentication. Refer to Using RSA Authentication of SSH .
2 Create shosts by copying the public RSA key to the file shosts in the directory .ssh , and write the IP address of the host to the file.
cp /etc/ssh/ssh_host_rsa_key.pub /.ssh/shosts
Security 721