Dell PowerEdge UPS 500T Installation And Configuration Manual Download Page 80

Page: 80 / 134

Configuring the Software

Click

to save and exit.

NOTE:

If the UPS Control Commands from Serial Port setting is disabled, configuration and load control

commands are restricted to the LCD only. A read-only access message displays when you click OK.

(see Figure 82). You must enable this setting from the LCD before you can apply changes to the UPS On/Off

window.

Figure 82. UPS is Set to Read-Only Message

The UPS On/Off Manager window displays the task with a red or green dot on the scheduled day and

lists the detailed information in the task list (see Figure 83).

Figure 83. UPS On/Off Manager Window

Summary of Contents for PowerEdge UPS 500T







































































































































Search results

Summary of Contents for PowerEdge UPS 500T

Reviews:

Related manuals for PowerEdge UPS 500T

Brands by name

Popular brands

Dell PowerEdge UPS 500T, Installation And Configuration Manual

Search results

Summary of Contents for PowerEdge UPS 500T

Reviews:

Related manuals for PowerEdge UPS 500T

Brands by name

Popular brands