Dell PowerEdge UPS 500T Installation And Configuration Manual Download Page 102

Page: 102 / 134

Installation on a VMware ESX Server

102

Installation on a VMware ESX Server

This guide describes the installation and configuration of the Dell UPS Management Software on a

VMware ESX Server.
Dell UPS Management Software allows you to connect a 3.x or 4.x VMware ESX Server with a UPS

through the UPS RS-232 port, USB port, or through the Network Management Card. The software will

be monitored and configured by a remote Agent on either a Microsoft Windows or Linux platform

(see Figure 107).
The software notifies the VMware server of power events or UPS alerts with pop-up broadcast

information on the console. It also safely shuts down the VMware ESX server and the guest operating

system.
Before the VMware ESX system shuts down, use the shutdown script to shut down the guest operating

system.
All operations were tested on a VMware server with two guest operating systems [Windows Small

Business Server (SBS) 2003 and Red Hat] when certain conditions existed, such as:

• UPS Battery is low
• Battery backup time is reached
• Battery discharge time is reached

Tested operations include:

• Safe shut down of the VMware server
• Safe shut down of the guest operating system
• Notifications of any power events or UPS alerts to the VMware server

Summary of Contents for PowerEdge UPS 500T







































































































































Search results

Summary of Contents for PowerEdge UPS 500T

Reviews:

Related manuals for PowerEdge UPS 500T

Brands by name

Popular brands

Dell PowerEdge UPS 500T, Installation And Configuration Manual

Search results

Summary of Contents for PowerEdge UPS 500T

Reviews:

Related manuals for PowerEdge UPS 500T

Brands by name

Popular brands