Dell PowerEdge UPS 500T Installation And Configuration Manual Download Page 22

Page: 22 / 134

Installation

Start the Monitor. Right click the Dell UPS Management Software Tray Icon and select Start Monitor

(see Figure 20).

Figure 20. Starting the Monitor

For Microsoft Windows Vista, Windows 7, and Windows Server 2008 operating systems, complete

steps 4 and 5.

Right click the Dell UPS Management Software Tray Icon and select

Exit

Restart the computer to restart the Dell UPS Management Software.
If you have administrator privileges, you can restart the Dell UPS Management Software without

restarting the computer:
• To start the Agent, select

Start menu > Control Panel > Administrative tools > Services

, and

find the service UPSMSmonitor. Right click UPSMSmonitor and select Start.

• To start the Tray Icon, select

Start menu > All Programs > Dell UPS Management Software

Software Startup in a Linux Operation System

To start the software in a Linux operating system:

The Agent starts automatically at system boot. If not already started, from the /opt/UPS directory,

enter the command:

./agent start

Start the Monitor. From the /opt/UPS directory, enter the command:

./monitor

Summary of Contents for PowerEdge UPS 500T







































































































































Search results

Summary of Contents for PowerEdge UPS 500T

Reviews:

Related manuals for PowerEdge UPS 500T

Brands by name

Popular brands

Dell PowerEdge UPS 500T, Installation And Configuration Manual

Search results

Summary of Contents for PowerEdge UPS 500T

Reviews:

Related manuals for PowerEdge UPS 500T

Brands by name

Popular brands