Dell PowerEdge UPS 500T Installation And Configuration Manual Download Page 75

Page: 75 / 134

Configuring the Software

Click

to save and exit.

NOTE:

If the UPS Control Commands from Serial Port setting is disabled, configuration and load control

commands are restricted to the LCD only. A read-only access message displays when you click OK

(see Figure 76). You must enable this setting from the LCD before you can apply changes to the UPS Self-Test

window.

Figure 76. UPS is Set to Read-Only Message

The UPS Test Manager window displays the task with a blue dot on the scheduled day and lists the

detailed information in the task list (see Figure 77).

Figure 77. UPS Test Manager Window

Summary of Contents for PowerEdge UPS 500T







































































































































Search results

Summary of Contents for PowerEdge UPS 500T

Reviews:

Related manuals for PowerEdge UPS 500T

Brands by name

Popular brands

Dell PowerEdge UPS 500T, Installation And Configuration Manual

Search results

Summary of Contents for PowerEdge UPS 500T

Reviews:

Related manuals for PowerEdge UPS 500T

Brands by name

Popular brands