Dell PowerEdge 6350, Installation And Troubleshooting Manual

Page: 41 / 205

Messages and Codes 3-13
4-3-1 Faulty or improperly
seated DIMM, DIMMs
not installed in sets of
four, or a faulty or improp-
erly seated memory
module Be sure that the DIMMs are installed in
sets of four and in the proper sockets for
each memory bank in use. If this does not
resolve the problem, remove and reseat
the DIMMs and the memory module. If
the problem persists, replace the DIMMs
or the memory module. See “Adding
Memory” in Chapter 8 for instructions on
installing or removing DIMMs or the mem-
ory module.
4-3-3 Defective system board Replace the system board. See
Chapter 12, “Getting Help,” for instruc-
tions on obtaining technical assistance.
4-3-4 Time-of-day clock
stopped Replace the battery (see Chapter 8,
“Installing System Board Options”). If the
problem persists, replace the system
board. See Chapter 12, “Getting Help,”
for instructions on obtaining technical
assistance.
4-4-1 Faulty I/O chip Replace the system board. See
Chapter 12, “Getting Help,” for instruc-
tions on obtaining technical assistance.
4-4-1 Super I/O controller fail-
ure Replace the system board. See
Chapter 12, “Getting Help,” for instruc-
tions on obtaining technical assistance.
4-4-2 Parallel-port test failure
(defective system board) Replace the system board. See
Chapter 12, “Getting Help,” for instruc-
tions on obtaining technical assistance.
4-4-3 Math coprocessor failure
(defective microproces-
sor) Replace the microprocessor. See
Chapter 8, “Installing System Board
Options,” for instructions.
4-4-4 Cache test failure (defec-
tive microprocessor) Replace the microprocessor. See
Chapter 8, “Installing System Board
Options,” for instructions.
7DEOH 6\VWHP %HHS &RGHV FRQWLQXHG
&RGH &DXVH &RUUHFWLYH $FWLRQ
NOTE: For the full name of an abbreviation or acronym used in this table, see the abbreviation and
acronym list that precedes the Index.