Dell PowerEdge 6350, Installation And Troubleshooting Manual

Page: 104 / 205

7-20 Dell PowerEdge 6350 Systems Installation and Troubleshooting Guide
&$87,21 6HH ´3URWHFWLQJ $JDLQVW (OHFWURVWDWLF 'LVFKDUJHµ LQ WKH VDIHW\
LQVWUXFWLRQV DW WKH IURQW RI WKLV JXLGH
2. Open the panel doors on top of the computer.
See “Accessing the Interior of Your System” found earlier in this chapter.
3. Remove all expansion cards except the SCSI host adapter card and the video
expansion card (if they are installed).
4. Close the computer panel doors, reconnect the system to the AC power source,
and turn on the system.
5. Enter the System Setup program, and update the system configuration
information.
See Chapter 4, “Using the System Setup Program,” in the system User’s Guide
for instructions.
6. Run the System Set Test Group in the Dell Diagnostics.
See Chapter 5, “Running the Dell Diagnostics.”
Do the tests complete successfully?
Yes. Go to step 7.
No. Go to step 12.
7. Turn off the system, disconnect it from the AC power source, and open the com-
puter panel doors.
8. Reinstall one of the expansion cards you removed in step 3, repeat steps 4, 5,
and 6, and continue with step 9.
9. Close the panel doors on top of the computer, and reconnect the system to the
AC power source.
10. Run the System Set Test Group again.
Do the tests complete successfully?
Yes.
Go to step 11.
No. Go to step 12.
11. Repeat steps 7, 8, and 9 for each of the remaining expansion cards you removed
in step 3.
Have you reinstalled all of the expansion cards without encountering a test
failure?
Yes. Go to step 12.
No. The expansion card is faulty. See Chapter 12, “Getting Help,” for instructions
on obtaining technical assistance.