Dell PowerEdge 6350, Installation And Troubleshooting Manual

Page: 39 / 205

Messages and Codes 3-11
1-3-2 No memory installed Be sure that the DIMMs are installed in
sets of four and in the proper sockets for
each memory bank in use. If this does not
resolve the problem, remove and reseat
the DIMMs and the memory module. If
the problem persists, replace the DIMMs
or the memory module. See “Adding
Memory” in Chapter 8 for instructions on
installing or removing DIMMs or the mem-
ory module. If the problem still persists,
replace the system board. See Chapter 12,
“Getting Help,” for instructions on obtain-
ing technical assistance.
1-3-3
1-3-4
1-4-1
1-4-2
2-1-1
through
2-4-4
Chip or data line failure in
the first 64 KB of main
memory
Odd/even logic failure in
the first 64 KB of main
memory
Address line failure in the
first 64 KB of main
memory
Parity failure in the first
64 KB of main memory
Bit failure in the first
64 KB of main memory
Be sure that the DIMMs are installed in
sets of four and in the proper sockets for
each memory bank in use. If this does not
resolve the problem, remove and reseat
the DIMMs and the memory module. If
the problem persists, replace the DIMMs
or the memory module. See “Adding
Memory” in Chapter 8 for instructions on
installing or removing DIMMs or the mem-
ory module. If the problem still persists,
replace the system board. See Chapter 12,
“Getting Help,” for instructions on obtain-
ing technical assistance.
3-1-1
3-1-2
3-1-3
3-1-4
Slave DMA-register
failure
Master DMA-register
failure
Master interrupt-mask
register failure
Slave interrupt-mask
register failure
Replace the system board. See
Chapter 12, “Getting Help,” for instruc-
tions on obtaining technical assistance.
7DEOH 6\VWHP %HHS &RGHV FRQWLQXHG
&RGH &DXVH &RUUHFWLYH $FWLRQ
NOTE: For the full name of an abbreviation or acronym used in this table, see the abbreviation and
acronym list that precedes the Index.