Dell OptiPlex SX270 User Manual Download Page 1 | Manualshive

Page: 1 / 102

background image

Dell™ OptiPlex™ SX270 Systems User's Guide

Notes, Notices, and Cautions

Dell recommends that the original version (Gold) of Windows XP should not be installed on this platform.

Abbreviations and Acronyms

For a complete list of abbreviations and acronyms, see the "

Glossary

."

If you purchased a Dell™ n Series computer, any references in this document to Microsoft®

Windows

®

operating systems are not applicable.

Information in this document is subject to change without notice.

© 2003 Dell Computer Corporation. All rights reserved.

Reproduction in any manner whatsoever without the written permission of Dell Computer Corporation

is strictly forbidden.

Trademarks used in this text:

Dell

, the

DELL

logo,

OptiPlex

,

Inspiron

,

Dimension

,

Latitude

,

Dell Precision

,

DellNet

,

Dell Travellite

, and

Dell OpenManage

are trademarks of Dell Computer

Corporation;

Intel

,

Pentium

, and

Celeron

are registered trademarks of Intel Corporation

; Microsoft, Windows NT, MS-DOS,

and

Windows

are registered trademarks of Microsoft

Corporation;

IBM

and

OS/2

are registered trademarks of International Business Machines Corporation;

Bluetooth

is a trademark owned by Bluetooth SIG, Inc. and is used by Dell

Computer Corporation under license;

ENERGY STAR

is a registered trademark of the U.S. Environmental Protection Agency. As an ENERGY STAR Partner, Dell Computer Corporation

has determined that this product meets the ENERGY STAR guidelines for energy efficiency.

Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Computer Corporation
disclaims any proprietary interest in trademarks and trade names other than its own.

Model: DCT

March 2003 P/N K0125 Rev. A00

Documentation for Your Computer

Finding Information for Your Computer

Technical Specifications

System Board Components

Cleaning Your Computer

Advanced Features

LegacySelect Technology Control

Manageability

Security

Password Protection

System Setup

Booting to a USB Device

Jumper Settings

Power Button

Power Management

Hyper-Threading

About Your Computer

Front View

Back View

Back-Panel Connectors

Inside Your Computer

Orientations

Chassis Stand

Cable Cover

Mounting Plate

Connecting the Power Adapter

Adding and Removing Parts

Removing the Computer Cover

Battery

Module Bay

Hard Drive

Memory

Microprocessor

Replacing the Computer Cover

Computer and Software Problems

Solving Problems

Advanced Troubleshooting

Getting Help

Additional Information

Microsoft

®

Windows

®

XP Features

Glossary

CAUTION: Safety Instructions

Ergonomic Computing Habits

Regulatory Notices

Warranty and Return Policy

NOTE:

A NOTE indicates important information that helps you make better use of your computer.

NOTICE:

A NOTICE indicates either potential damage to hardware or loss of data and tells you how to avoid the problem.

CAUTION:

A CAUTION indicates a potential for property damage, personal injury, or death.

1
2
3
...
»

Summary of Contents for OptiPlex SX270







































































































Reviews:

No comments

Related manuals for OptiPlex SX270

Brand: Daikin Pages: 20

Brand: IBM Pages: 194

Brand: Sony Pages: 2

Brand: Sony Pages: 2

Brand: Sony Pages: 475

Brand: IBM Pages: 52

Brand: U-Line Pages: 6

Brand: Intergraph Pages: 10

Brand: Intergraph Pages: 70

Brand: Intergraph Pages: 136

Brand: Cybernet Pages: 32

Brand: Biostar Pages: 42

Brand: Vivo Pages: 8

Brand: ASEM Pages: 118

Brand: DAP Technologies Pages: 12

MICROFLEX CE8000

Brand: DAP Technologies Pages: 62

Brand: Sporty's Pages: 54

Brand: Shuttle Pages: 1

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands