manualshive.com logo in svg

Dell OptiPlex SX270, User Manual, Page: 80 / 102

Share
Download
Dell OptiPlex SX270 User Manual Download Page 80

Back to Contents Page

 

 

 

l

 

Handle all electrostatic sensitive components in a static-safe area. If possible, use antistatic floor pads and workbench pads. 

 

Ergonomic Computing Habits  

 

 

 

 

 

For comfort and efficiency, observe the ergonomic guidelines in "

Ergonomic Computing Habits

" when setting up and using your computer. 

 

CAUTION: 

Improper or prolonged keyboard use may result in injury.

 

CAUTION: 

Viewing the monitor screen for extended periods of time may result in eye strain.

 Battery Disposal 

 

Your computer uses a lithium coin-cell battery. The lithium coin-cell battery is a long-life battery, and it is very possible that you will never need to replace it. 

However, should you need to replace it, see "

Battery

." 

 

Do not dispose of the battery along with household waste. Contact your local waste disposal agency for the address of the nearest battery deposit site. 

Summary of Contents for OptiPlex SX270







































































































Reviews:

No comments