Dell OptiPlex SX270 User Manual Download Page 91

Page: 91 / 102

Mouse Problems

Fill out the

Diagnostics Checklist

as you complete these checks.

Network Problems

Power Problems

Restart the computer

—

Simultaneously press <Ctrl><Esc> to display the

Start

menu.

Type

, press the keyboard arrow keys to highlight

Shut down

Turn Off

, and then press <Enter>.

After the computer turns off, press the power button to restart the computer.

Check the mouse cable

—

Check the cable connector for bent or broken pins and for damaged or frayed cables. Straighten bent pins.

Ensure that the cable is firmly connected to the computer.

Test the mouse

—

Connect a properly working mouse to the computer, and try using the mouse. If the new mouse works, the original

mouse was faulty.

Check the mouse settings

—

Windows

Click the

Start

button, click

Control Panel

, and then click

Printers and Other Hardware

Click

Mouse

Try adjusting the settings.

Windows 2000, Windows NT

, and Windows 98

Click the

Start

button, point to

Settings

, and then click

Control Panel

Double-click the

Mouse

icon.

Try adjusting the settings.

If you are using a PS/2 mouse

Enter

system setup

and ensure that

Mouse Port

under the

Integrated Devices

option is set to

Exit system setup and restart the computer.

Reinstall the mouse driver

—

See "

Reinstalling Drivers and Utilities

Run the

Dell Diagnostics

—

If any of the diagnostics tests fail,

contact Dell

Check for interrupt request conflicts

—

See "

Resolving Software and Hardware Incompatibilities

Check the network cable connector

—

Ensure that the network cable is firmly inserted into both the network connector on the back of the

computer and the network jack.

Check the network lights on the back of the computer

—

If the network adapter lights are blank (off) it indicates that a physical connection to the network cannot be detected or that the integrated
network adapter is disabled in System Setup.

Restart the computer and try to log on to the network again

Check your network settings

—

Contact your network administrator or the person who set up your network to verify that your network

settings are correct and that the network is functioning.

Check for interrupt request conflicts

—

See "

Resolving Software and Hardware Incompatibilities

CAUTION:

Before you begin any of the procedures in this section, follow the steps in "

CAUTION: Safety Instructions

Summary of Contents for OptiPlex SX270







































































































Search results

Summary of Contents for OptiPlex SX270

Reviews:

Related manuals for OptiPlex SX270

Brands by name

Popular brands

Dell OptiPlex SX270, User Manual

Search results

Summary of Contents for OptiPlex SX270

Reviews:

Related manuals for OptiPlex SX270

Brands by name

Popular brands