Dell Latitude XT PP12S, User Manual

Page: 65 / 230

Setting Up and Using Your Tablet-PC
65
• Pen only — Touch mode is disabled.
• Touch only — Pen input is disabled.
• Auto mode — If the pen is close to the display, pen mode is active. If the
pen is not within range, double-tap the display with your finger to enter
touch mode. Touch mode remains active until the pen is in range again.
• Dual mode — Microsoft Vista switches automatically between the pen
and touch modes, based on its internal algorithms.
To access the digitizer utility and set the input mode, right-click in the
taskbar, select Properties , and then the Digitizer Options tab. Click the radio
button for the input mode you want to set, and click Apply .
To learn more about touch mode and practice using it, click Start
→
All
Programs
→
Tablet PC
→
Tablet PC Touch Training .
Using QuickSet
NOTICE:
If you uninstall QuickSet from your Tablet-PC you will also delete the
tablet button drivers. To reinstall QuickSet and the tablet button drivers, go to
support.dell.com .
You can access Dell QuickSet from the QuickSet icon in the taskbar or
through the Windows Mobility Center.
Depending on what you want to do, you can start QuickSet by either clicking ,
double
-
clicking
, or
right
-
clicking
the QuickSet icon in the Windows taskbar.
The taskbar is located in the lower-right corner of your screen.
Clicking the QuickSet Icon
NOTE:
The following features may not be available on certain computers.
Click the QuickSet icon to:
• Control internal network card activity.
• Manage hot key pop-ups:
• Enable or disable the appearance of the Brightness Meter on your
screen.
• Enable or disable the appearance of the Volume Meter on your
screen.
• Turn the Wireless Activity Indicator on or off.