Dell Latitude XT PP12S, User Manual, Page: 175 / 230

175
Installing the Fan
1
Seat the fan into the system board, and tighten the four M2 x 3-mm screw
using a #0 Phillips screwdriver.
2
Connect the fan cable to the system board.
3
Install the system board (see "Installing the System Board" on page 173).
4
Install the palm rest (see "Installing the Palm Rest" on page 171).
5
Install the keyboard (see "Installing the Keyboard" on page 160).
6
Install the display assembly (see "Installing the Display Assembly" on
page 165).
7
Install the hinge cover (see "Installing the Hinge Cover" on page 158).
8
Install any mini cards (see "Installing a Mini Card" on page 156).
Pen and Whip Antenna Assembly
CAUTION:
Before performing the following procedures, follow the safety
instructions in your Product Information Guide .
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist
grounding strap or by periodically touching a connector on the back panel of the
Tablet-PC.
NOTICE:
To avoid damaging the system board, you must remove the main battery
before you begin working inside the Tablet-PC.
Removing the Pen and Whip Antenna Assembly
1
Follow the procedures in "Before You Begin" on page 139.
2
Remove the hinge cover (see "Removing the Hinge Cover" on page 157).
3
Remove the display assembly (see "Removing the Display Assembly" on
page 162).
4
Remove the keyboard (see "Removing the Keyboard" on page 159).
1 M2 x 3-mm screws (4) 2 fan
3 fan cable connector