Dell Latitude XT PP12S, User Manual

Page: 153 / 230

153
4
Replace the memory and mini-card cover, and tighten the two captive
screws (see "Installing the Memory and Mini-card Cover" on page 151).
NOTICE:
If the cover is difficult to close, remove the module and reinstall it. Forcing
the cover to close may damage your Tablet-PC.
5
Insert the battery into the battery bay, or connect the AC adapter to your
Tablet-PC and an electrical outlet.
6
Turn on the Tablet-PC.
As the Tablet-PC boots, it detects the additional memory and automatically
updates the system configuration information.
To confirm the amount of memory installed in the Tablet-PC, click
Start
,
and right-click
Computer → Properties
.
Mini Card
Your Tablet-PC supports a Wireless Wide Area Network (WWAN) card and a
Wireless Local Area Network (WLAN) card; both mini cards are installed the
same way, although they have different connectors on the system board. If
you ordered a mini card with your Tablet-PC, the card is already installed.
CAUTION:
Before you begin any of the procedures in this section, follow the
safety instructions located in the Product Information Guide .
NOTICE:
To prevent damage to the system board, remove the main battery before
you service the Tablet-PC.
Removing a Mini Card
1
Follow the procedures in "Before You Begin" on page 139.
2
Remove the memory and mini-card cover. See "Removing the Memory and
Mini-card Cover" on page 150.
1 tab 2 notch