manualshive.com logo in svg

Dell Latitude XT PP12S, User Manual, Page: 187 / 230

Share
Download
Dell Latitude XT PP12S User Manual Download Page 187

Media Base (Optional)

187

T

ABLET

- P C  

RELEASE

 

LEVER

—

Lets you undock the Tablet-PC from the media base 

(see "Undocking Your Tablet-PC From the Media Base" on page 194).

A C  

ADAPTER

 

CONNECTOR

1

Tablet-PC release lever

2

AC adapter connector

3

audio connector

4

IEEE 1394

5

VGA video connector

6

digital video interface (DVI) connector

7

serial connector

8

USB connector

9

powered USB connector

10

network connector

Connects an AC adapter to the media base and to AC power 
to convert AC power to the DC power required by the media 
base. You can connect the AC adapter with your media base 
either turned on or off. For more information, see "Setting 
Up Your Media Base" on page 191.

 

CAUTION: 

If you are using a multiple-outlet power 

strip, use caution when you plug the AC adapter power 
cable into the power strip. Some power strips may 
allow you to insert the connector incorrectly. Incorrect 
insertion of the power connector could result in 
permanent damage to your media base as well as 
electric shock and/or fire. Ensure that you insert the 
ground prong of the power plug into the mating ground 
contact of the power strip.

 

NOTICE: 

When you disconnect the AC adapter from the 

media base, hold the adapter cable connector, not the 
cable itself, and pull firmly to avoid damaging the cable.

Summary of Contents for Latitude XT PP12S







































































































































































































































Reviews:

No comments