manualshive.com logo in svg

Dell Latitude XT PP12S, User Manual, Page: 151 / 230

Share
Download
Dell Latitude XT PP12S User Manual Download Page 151

151

Installing the Memory and Mini-card Cover

1

Follow the procedures in "Before You Begin" on page 139.

2

Turn the Tablet-PC upside-down, fit the cover into place, and tighten the 
two captive screws on the memory and mini-card cover.

Memory

You can increase your Tablet-PC memory by installing memory modules on 
the system board. See "Specifications" on page 40 for information on the 
memory supported by your Tablet-PC. Install only memory modules that are 
intended for your Tablet-PC.

 

CAUTION: 

Before you begin any of the procedures in this section, follow the 

safety instructions located in the 

Product Information Guide

.

 

NOTICE: 

To prevent damage to the system board, remove the main battery before 

you service the Tablet-PC. 

Removing a Memory Module

1

Follow the procedures in "Before You Begin" on page 139.

Summary of Contents for Latitude XT PP12S







































































































































































































































Reviews:

No comments