manualshive.com logo in svg

Dell DX6000, Hardware Owner'S Manual

Share
Download
Dell DX6000 Hardware Owner'S Manual Download Page 97

Installing System Components

97

Internal USB Cable

Removing the Internal USB Cable

 

CAUTION: 

Many repairs may only be done by a certified service technician. 

You should only perform troubleshooting and simple repairs as authorized in 
your product documentation, or as directed by the online or telephone service 
and support team. Damage due to servicing that is not authorized by Dell is not 
covered by your warranty. Read and follow the safety instructions that came 
with the product.

1

Turn off the system, including any attached peripherals, and disconnect 

the system from the electrical outlet.

2

Open the system. See "Opening the System" on page 83.

3

Remove the fan bracket. See "Removing the Fan Bracket" on page 107.

4

Remove the USB cable from the connector on the control panel.

5

Remove the USB cable from the cable routing guides on the inside of the 

chassis. If necessary remove any other cables from the cable routing guides.

6

Remove the USB cable from the connector on the system board.

Installing the Internal USB Cable

 

CAUTION: 

Many repairs may only be done by a certified service technician. 

You should only perform troubleshooting and simple repairs as authorized in 
your product documentation, or as directed by the online or telephone service 
and support team. Damage due to servicing that is not authorized by Dell is not 
covered by your warranty. Read and follow the safety instructions that came 
with the product.

1

Turn off the system, including any attached peripherals, and disconnect 

the system from the electrical outlet.

2

Open the system. See "Opening the System" on page 83.

3

Remove the fan bracket. See "Removing the Fan Bracket" on page 107.

4

Connect the USB cable to the connector on the control panel.

5

Route the cable through the cable routing guides on the inside of the 

chassis.

6

Connect the USB cable to the connector on the system board.

7

Replace the fan bracket. See "Replacing the Fan Bracket" on page 108.

Summary of Contents for DX6000







































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands