manualshive.com logo in svg

Dell DX6000, Hardware Owner'S Manual

Share
Download
Dell DX6000 Hardware Owner'S Manual Download Page 103

Installing System Components

103

 

CAUTION: 

Never operate your system with the cooling shroud removed. 

Overheating of the system can develop quickly resulting in a shutdown of the 
system and the loss of data.

Removing the Cooling Shroud

 

CAUTION: 

Many repairs may only be done by a certified service technician. 

You should only perform troubleshooting and simple repairs as authorized in 
your product documentation, or as directed by the online or telephone service 
and support team. Damage due to servicing that is not authorized by Dell is not 
covered by your warranty. Read and follow the safety instructions that came 
with the product.

1

Turn off the system, including any attached peripherals, and disconnect 

the system from the electrical outlet.

2

Open the system. See "Opening the System" on page 83.

3

Use the lift handles on the cooling shroud to lift the shroud out of the 

system. See Figure 3-12. 

Summary of Contents for DX6000







































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands