174
Running the System Diagnostics
• View status messages that inform you if tests are completed successfully
• View error messages that inform you of problems encountered during
testing.
When to Use the Embedded System Diagnostics
If a major component or device in the system does not operate properly,
component failure may be indicated. As long as the processor and the
system's input/output devices are functioning, you can use the system
diagnostics to help identify the problem.
Running the Embedded System Diagnostics
The embedded system diagnostics program is run from the iDRAC6 Express
System Services menu.
CAUTION:
Use the system diagnostics to test only your system. Using this
program with other systems may cause invalid results or error messages.
1
As the system boots, press <F10>.
2
Select
Diagnostics
from the System Services menu.
3
Select
Launch Diagnostics
.
4
From the
Diagnostics
main menu, select
Run Diags
, or select
MpMemory
if you are troubleshooting memory.
The
Diagnostics
menu allows you to run all or specific diagnostics tests, or to
exit.
System Diagnostics Testing Options
Select the testing option in the
Main
Menu
window.
Testing Option
Function
Express Test
Performs a quick check of the system. This option runs
device tests that do not require user interaction.
Extended Test
Performs a more thorough check of the system. This test
can take an hour or longer.
Summary of Contents for DX6000
