Dell 1510 - Vostro - Core 2 Duo 2.1 GHz Service Manual Download Page 74

Page: 74 / 116

Display

FILE LOCATION:

C:\Documents and Settings\sarah_cook\Desktop\Tsing

Ma\SM\A01\EN\Source\display.fm

DELL CONFIDENTIAL – PRELIMINARY 9/4/09 - FOR PROOF ONLY

Replace the display inverter (see "Replacing the Display Inverter" on
page 71).

Replace the display bezel (see "Replacing the Display Bezel" on page 70).

Replace the display assembly (see "Replacing the Display Assembly" on
page 67).

Replace the keyboard (see "Replacing the Keyboard" on page 58).

Replace the hinge cover (see "Replacing the Hinge Cover" on page 54).

Replace the WLAN card (see "Replacing a WLAN Card" on page 39).

Replace the hard drive cover. See "Removing the Hard Drive" on page 33
for an illustration of the hard drive cover.

Display Cable

Removing the Display Cable

CAUTION:

Before you begin the following procedure, follow the safety

instructions that shipped with your computer.

Follow the instructions in "Before Working on Your Computer" on page 29.

Remove the hard drive cover. See "Removing the Hard Drive" on page 33
for an illustration of the hard drive cover.

Remove the WLAN card (see "Removing a WLAN Card" on page 37).

Remove the hinge cover (see "Removing the Hinge Cover" on page 53).

Remove the keyboard (see "Removing the Keyboard" on page 57).

Remove the display assembly (see "Removing the Display Assembly" on
page 65).

Remove the display bezel (see "Removing the Display Bezel" on page 68).

Remove the display inverter (see "Removing the Display Inverter" on
page 70).

Remove the camera/microphone assembly (see "Removing the Camera
and Microphone Assembly" on page 76).

Remove the two M2 x 5-mm screws from the hinges.

Remove the display panel (see "Removing the Display Panel" on page 72).

Lift the display panel out of the top cover.

Summary of Contents for 1510 - Vostro - Core 2 Duo 2.1 GHz





















































































































Search results

Summary of Contents for 1510 - Vostro - Core 2 Duo 2.1 GHz

Reviews:

Related manuals for 1510 - Vostro - Core 2 Duo 2.1 GHz

Brands by name

Popular brands

Dell 1510 - Vostro - Core 2 Duo 2.1 GHz, Service Manual

Search results

Summary of Contents for 1510 - Vostro - Core 2 Duo 2.1 GHz

Reviews:

Related manuals for 1510 - Vostro - Core 2 Duo 2.1 GHz

Brands by name

Popular brands