Dell 1510 - Vostro - Core 2 Duo 2.1 GHz Service Manual Download Page 76

Page: 76 / 116

Display

FILE LOCATION:

C:\Documents and Settings\sarah_cook\Desktop\Tsing

Ma\SM\A01\EN\Source\display.fm

DELL CONFIDENTIAL – PRELIMINARY 9/4/09 - FOR PROOF ONLY

Replace the display assembly (see "Replacing the Display Assembly" on
page 67).

Replace the keyboard (see "Replacing the Keyboard" on page 58).

Replace the hinge cover (see "Replacing the Hinge Cover" on page 54).

Replace the WLAN card (see "Replacing a WLAN Card" on page 39).

Replace the hard drive cover. See "Removing the Hard Drive" on page 33
for an illustration of the hard drive cover.

Camera and Microphone Assembly

Removing the Camera and Microphone Assembly

CAUTION:

Before you begin the following procedure, follow the safety

instructions that shipped with your computer.

Follow the instructions in "Before Working on Your Computer" on page 29.

Remove the hard drive cover. See "Removing the Hard Drive" on page 33
for an illustration of the hard drive cover.

Remove the WLAN card (see "Removing a WLAN Card" on page 37).

Remove the hinge cover (see "Removing the Hinge Cover" on page 53).

Remove the keyboard (see "Removing the Keyboard" on page 57).

Remove the display assembly (see "Removing the Display Assembly" on
page 65).

Remove the display bezel (see "Removing the Display Bezel" on page 68).

Remove the M2 x 3-mm screw that secures the camera/microphone
assembly.

Lift the camera/microphone out of the top cover and disconnect the
camera/microphone cable.

Summary of Contents for 1510 - Vostro - Core 2 Duo 2.1 GHz





















































































































Search results

Summary of Contents for 1510 - Vostro - Core 2 Duo 2.1 GHz

Reviews:

Related manuals for 1510 - Vostro - Core 2 Duo 2.1 GHz

Brands by name

Popular brands

Dell 1510 - Vostro - Core 2 Duo 2.1 GHz, Service Manual

Search results

Summary of Contents for 1510 - Vostro - Core 2 Duo 2.1 GHz

Reviews:

Related manuals for 1510 - Vostro - Core 2 Duo 2.1 GHz

Brands by name

Popular brands