manualshive.com logo in svg

Dell 1510 - Vostro - Core 2 Duo 2.1 GHz, Service Manual, Page: 39 / 116

Share
Download
Dell 1510 - Vostro - Core 2 Duo 2.1 GHz Service Manual Download Page 39

Wireless Local Area Network (WLAN) Card

39

FILE LOCATION:

  C:\Documents and Settings\sarah_cook\Desktop\Tsing 

Ma\SM\A01\EN\Source\minicard.fm

DELL CONFIDENTIAL – PRELIMINARY 9/4/09 - FOR PROOF ONLY

Replacing a WLAN Card

 

NOTICE: 

The connectors are keyed to ensure correct insertion. If you feel 

resistance, check the connectors on the card and on the system board, and realign 
the card.

 

NOTICE: 

To avoid damage to the WLAN card, never place cables under the card.

This procedure assumes that you have completed the removal procedure 
"Removing a WLAN Card" on page 37. 

1

Insert the 

WLAN

 card connector into the system board connector at a 45-

degree angle. 

2

Connect the antenna cables to the 

WLAN

 card that you are installing. 

1

antenna cables (2)

2

 WLAN card

3

system board connector 

2

3

1

Summary of Contents for 1510 - Vostro - Core 2 Duo 2.1 GHz





















































































































Reviews:

No comments