Dell 1510 - Vostro - Core 2 Duo 2.1 GHz Service Manual Download Page 65

Page: 65 / 116

Template Last Updated - 2/7/2007

Display

DELL CONFIDENTIAL – PRELIMINARY 9/4/09 - FOR PROOF ONLY

Display

Display Assembly

Removing the Display Assembly

CAUTION:

Before you begin the following procedure, follow the safety

instructions that shipped with your computer.

Follow the instructions in "Before Working on Your Computer" on page 29.

Remove the hard drive cover. See "Removing the Hard Drive" on page 33
for an illustration of the hard drive cover.

Remove the WLAN card (see "Removing a WLAN Card" on page 37).

Remove the M2.5 x 8-mm screw that attaches the display assembly to one
corner of the computer.

Remove the hinge cover (see "Removing the Hinge Cover" on page 53).

Remove the keyboard (see "Removing the Keyboard" on page 57).

Summary of Contents for 1510 - Vostro - Core 2 Duo 2.1 GHz





















































































































Search results

Summary of Contents for 1510 - Vostro - Core 2 Duo 2.1 GHz

Reviews:

Related manuals for 1510 - Vostro - Core 2 Duo 2.1 GHz

Brands by name

Popular brands

Dell 1510 - Vostro - Core 2 Duo 2.1 GHz, Service Manual

Search results

Summary of Contents for 1510 - Vostro - Core 2 Duo 2.1 GHz

Reviews:

Related manuals for 1510 - Vostro - Core 2 Duo 2.1 GHz

Brands by name

Popular brands