Dell 1510 - Vostro - Core 2 Duo 2.1 GHz Page 35 Service Manual Download

Page: 35 / 116

Hard Drive

FILE LOCATION:

C:\Documents and Settings\sarah_cook\Desktop\Tsing

Ma\SM\A01\EN\Source\hdd.fm

DELL CONFIDENTIAL – PRELIMINARY 9/4/09 - FOR PROOF ONLY

Replacing the Hard Drive

CAUTION:

Before you begin any of the procedures in this section, follow the

safety instructions that shipped with your computer.

NOTICE:

Hard drives are extremely fragile. Exercise care when handling the hard

drive.

NOTICE:

Use firm and even pressure to slide the hard drive into place. Excessive

force may result in damage to the connector.

This procedure assumes that you have completed the removal procedure
"Removing the Hard Drive" on page 33.

Slide the hard drive into the hard drive connector until the drive is fully
seated in the bracket.

Replace the hard drive bracket into the system.

Replace the three screws securing the hard drive.

Replace the hard drive cover aligning the notches.

hard drive

Summary of Contents for 1510 - Vostro - Core 2 Duo 2.1 GHz





















































































































Search results

Summary of Contents for 1510 - Vostro - Core 2 Duo 2.1 GHz

Reviews:

Related manuals for 1510 - Vostro - Core 2 Duo 2.1 GHz

Brands by name

Popular brands

Dell 1510 - Vostro - Core 2 Duo 2.1 GHz, Service Manual

Search results

Summary of Contents for 1510 - Vostro - Core 2 Duo 2.1 GHz

Reviews:

Related manuals for 1510 - Vostro - Core 2 Duo 2.1 GHz

Brands by name

Popular brands