Dell 1510 - Vostro - Core 2 Duo 2.1 GHz Page 84 Service Manual Download

Page: 84 / 116

Fingerprint Reader

FILE LOCATION:

C:\Documents and Settings\sarah_cook\Desktop\Tsing

Ma\SM\A01\EN\Source\fingprint.fm

DELL CONFIDENTIAL – PRELIMINARY 9/4/09 - FOR PROOF ONLY

Replacing the Fingerprint Reader

CAUTION:

Before you begin the following procedure, follow the safety

instructions that shipped with your computer.

NOTICE:

Ensure that the touch pad cable and the cable for the internal card with

Bluetooth

wireless technology are properly routed before snapping the palm rest

into place.

This procedure assumes that you have completed the removal procedure
"Removing the Fingerprint Reader" on page 83.

Position the fingerprint reader on the underside of the palm rest.

Connect the fingerprint reader cable connector to the fingerprint reader
connector and rotate the retaining bracket downward to secure the cable.

Replace the fingerprint reader cover and replace the M2 x 3-mm screw that
secures the cover to the palm rest.

Replace the palm rest (see "Replacing the Palm Rest" on page 81).

M2 x 3-mm screw

fingerprint reader cover

underside of palm rest

fingerprint reader

fingerprint reader connector with
retaining bracket

fingerprint reader cable

Summary of Contents for 1510 - Vostro - Core 2 Duo 2.1 GHz





















































































































Search results

Summary of Contents for 1510 - Vostro - Core 2 Duo 2.1 GHz

Reviews:

Related manuals for 1510 - Vostro - Core 2 Duo 2.1 GHz

Brands by name

Popular brands

Dell 1510 - Vostro - Core 2 Duo 2.1 GHz, Service Manual

Search results

Summary of Contents for 1510 - Vostro - Core 2 Duo 2.1 GHz

Reviews:

Related manuals for 1510 - Vostro - Core 2 Duo 2.1 GHz

Brands by name

Popular brands