Dell 1510 - Vostro - Core 2 Duo 2.1 GHz Page 81 Service Manual Download

Page: 81 / 116

Palm Rest

FILE LOCATION:

C:\Documents and Settings\sarah_cook\Desktop\Tsing

Ma\SM\A01\EN\Source\palmrest.fm

DELL CONFIDENTIAL – PRELIMINARY 9/4/09 - FOR PROOF ONLY

NOTICE:

Do not use force to separate the palm rest from the computer. If you

encounter resistance, gently flex or apply pressure to the palm rest, or move along
the edge, working away from the area of resistance, until the palm rest is free.

Disconnect the speaker connector from the palm rest. Remove tape as
necessary.

Moving from left to right, carefully lift the palm rest along the rear edge,
near the hinge brackets, and gently lift the palm rest.

Replacing the Palm Rest

CAUTION:

Before you begin the following procedure, follow the safety

instructions that shipped with your computer.

speaker connector

touch pad connector

fingerprint reader connector

computer base

multimedia panel connector

palm rest

Summary of Contents for 1510 - Vostro - Core 2 Duo 2.1 GHz





















































































































Search results

Summary of Contents for 1510 - Vostro - Core 2 Duo 2.1 GHz

Reviews:

Related manuals for 1510 - Vostro - Core 2 Duo 2.1 GHz

Brands by name

Popular brands

Dell 1510 - Vostro - Core 2 Duo 2.1 GHz, Service Manual

Search results

Summary of Contents for 1510 - Vostro - Core 2 Duo 2.1 GHz

Reviews:

Related manuals for 1510 - Vostro - Core 2 Duo 2.1 GHz

Brands by name

Popular brands