Dell 1510 - Vostro - Core 2 Duo 2.1 GHz Service Manual Download Page 71

Page: 71 / 116

Display

FILE LOCATION:

C:\Documents and Settings\sarah_cook\Desktop\Tsing

Ma\SM\A01\EN\Source\display.fm

DELL CONFIDENTIAL – PRELIMINARY 9/4/09 - FOR PROOF ONLY

Remove the M2 x 3-mm screw from the display inverter.

Disconnect the two display-inverter connectors.

Lift the display inverter out of the top cover.

NOTICE:

Removal of the bezel from the display back cover requires extreme care

to avoid damage to the bezel.

Replacing the Display Inverter

CAUTION:

Before you begin the following procedure, follow the safety

instructions that shipped with your computer.

This procedure assumes that you have completed the removal procedure
"Removing the Display Inverter" on page 70.

Connect the two display-inverter connectors to the display inverter.

display inverter connector

M2 x 3-mm screw (1)

display inverter

display inverter connector

Summary of Contents for 1510 - Vostro - Core 2 Duo 2.1 GHz





















































































































Search results

Summary of Contents for 1510 - Vostro - Core 2 Duo 2.1 GHz

Reviews:

Related manuals for 1510 - Vostro - Core 2 Duo 2.1 GHz

Brands by name

Popular brands

Dell 1510 - Vostro - Core 2 Duo 2.1 GHz, Service Manual

Search results

Summary of Contents for 1510 - Vostro - Core 2 Duo 2.1 GHz

Reviews:

Related manuals for 1510 - Vostro - Core 2 Duo 2.1 GHz

Brands by name

Popular brands