Dell 1350 Color User Manual Download Page 57

Page: 57 / 328

Installing Printer Drivers on Computers Running Windows

Installing Printer Drivers on

Computers Running Windows

Identifying Printer Driver Pre-install Status (For

Network Connection Setup)

Before installing the printer driver on your computer, print the printer

settings page to check the IP address of your printer.

The Operator Panel

Press the

(

Menu)

button.

Ensure that

Report/List

appears, and then press the button.

Ensure that

Printer Setting

appears, and then press the button.

The printer settings page is printed.

Find the IP address under

Network

(

Wired/Wireless

) on the printer

settings page.
If the IP address is

0.0.0.0

, wait for a few minutes to resolve the IP

address automatically, and then print the printer settings page again.
If the IP address is not resolved automatically, see "Assigning an IP Address

(for IPv4 mode)" on page 39.

The Tool Box

NOTE:

Click

Start



All Programs



Dell Printers



Dell 1350cnw Color

Printer



Tool Box

NOTE:

When multiple printer drivers are installed on your computer, the

Select Printer window opens. In this case, click the name of Dell 1350cnw

Color Printer listed in Printer Name, and then click OK.

The

Tool Box

opens.

Summary of Contents for 1350 Color









































































































































































































































































































































Search results

Summary of Contents for 1350 Color

Reviews:

Brands by name

Popular brands

Dell 1350 Color, User Manual

Search results

Summary of Contents for 1350 Color

Reviews:

Brands by name

Popular brands