manualshive.com logo in svg

Dell 1350 Color, User Manual

Share
Download
Dell 1350 Color User Manual Download Page 308

304

Troubleshooting

Jam

 

NOTE: 

In this section, some procedures that use the Tool Box can also be 

performed using the operator panel or Dell Printer Configuration Web Tool. For 

information on how to use the operator panel and Dell Configuration Web Tool, see 

"Understanding the Printer Menus" on page 215 and "Dell Printer Configuration Web 

Tool" on page 109.

2

1

Click 

Machine Check

 on the 

Diagnosis

 tab.

2

Select 

Dispense Motor Check (Yellow)

, 

Dispense Motor Check (Magenta)

, 

Dispense 

Motor Check (Cyan)

, or 

Dispense Motor 

Check (Black) 

from the drop-down list box, 

and click the 

Start

 button.

3

Click the 

Play of Sound

 button to check the 

motor sound.

4

Repeat steps 1 and 2 to perform Dispense 

Motor Check for the rest of the toner 

cartridges.

NOTE: 

You can perform Dispense Motor Check 

for CMYK in any order you desire.

NOTE: 

Do not check the operation of the 

dispense motor repeatedly.

Does the noise generated from the printer 

match with the noise from the 

Play of Sound 

button?

Contact Dell.

Go to action 3.

3

1

Reinstall the toner cartridges.

2

Perform action 2 again.

Does the noise generated from the printer 

match with the noise from the 

Play of Sound 

button?

Contact Dell.

The task is 

complete.

Action

Yes

No

Summary of Contents for 1350 Color









































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands