Dell 1350 Color User Manual Download Page 144

Page: 144 / 328

140

Dell Printer Configuration Web Tool

Print Server Settings

The

Print Server Settings

tab contains the

Basic Information

Port Settings

TCP/IP

E-Mail Alert

Bonjour (mDNS)

SNMP

LLTD

Wireless LAN

, and

Reset Print Server

pages.

Basic Information

Purpose:

To configure the basic information of the printer.

Values:

NOTE:

The Auto Refresh feature is effective for the contents of the top frame,

Printer Status page, Job List page, and Completed Jobs page.

Port Settings

Purpose:

To enable or disable printing connectors and management protocol features.

Values:

System Settings Printer Name

Specifies the name of the printer using up to 31

alphanumeric characters.

Location

Specifies the location of the printer using up to 63

alphanumeric characters.

Contact Person

Specifies the contact name, number, and other

information of the administrator and service

center using up to 63 alphanumeric characters.

Administrator

E-Mail Address

Specifies the contact address of the administrator

and service center using up to 63 alphanumeric

characters.

Asset Tag

Number

Enter the asset tag number for the printer.

EWS Settings

Auto Refresh

Automatically refreshes the contents of the status

display pages.

Auto Refresh

Interval

Sets the time interval for refreshing the contents

of the status display pages automatically from 15

to 600 seconds.

Summary of Contents for 1350 Color









































































































































































































































































































































Search results

Summary of Contents for 1350 Color

Reviews:

Brands by name

Popular brands

Dell 1350 Color, User Manual

Search results

Summary of Contents for 1350 Color

Reviews:

Brands by name

Popular brands