manualshive.com logo in svg

Dell 1350 Color, User Manual

Share
Download
Dell 1350 Color User Manual Download Page 284

280

Clearing Jams

 

CAUTION: 

Do not use excessive force on the tray. Doing so could damage the tray 

or the inside of the printer.

Clearing Paper Jams From the Back of the Printer

 

CAUTION: 

Before performing any of the following procedures, read and follow 

the safety instructions in your Product Information Guide.

 

CAUTION: 

To prevent electric shock, always turn off the printer and disconnect 

the power cable from the grounded outlet before performing maintenance.

 

CAUTION: 

To avoid burns, do not clear paper jams immediately after printing. The 

fuser becomes extremely hot during use.

 

NOTE: 

To resolve the error displayed on the operator panel, you must clear all print 

media from the print media path.

1

Push the rear cover release handle and open the rear cover.

2

Lift up the fuser release levers.

Summary of Contents for 1350 Color









































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands