manualshive.com logo in svg

Dell 1350 Color, User Manual

Share
Download
Dell 1350 Color User Manual Download Page 169

Loading Print Media

165

12

Loading Print Media

Loading print media properly helps prevent jams and ensures trouble-free 

printing.
Before loading print media, identify the recommended print side of the print 

media. This information is usually on the print media package.

 

NOTE: 

After loading paper, specify the same paper type on the operator panel.

Capacity

Multipurpose Feeder (MPF) can hold:

• 150 sheets of standard paper
• 16.2 mm (0.64 inches) of thick paper
• One sheet of coated paper
• 16.2 mm (0.64 inches) of post cards
• Five envelopes
• 16.2 mm (0.64 inches) of labels

Priority Sheet Inserter (PSI) can hold:

• 10 sheets of standard paper or one sheet of other paper

Print Media Dimensions

The MPF accepts print media within the following dimensions:

• Width — 76.2 mm (3.00 inches) to 215.9 mm (8.50 inches)
• Length — 127 mm (5.00 inches) to 355.6 mm (14.00 inches)

The PSI accepts print media within the following dimensions:

• Width — 76.2 mm (3.00 inches) to 215.9 mm (8.50 inches)

Summary of Contents for 1350 Color









































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands