Dell 1350 Color, User Manual

Page: 281 / 328

Clearing Jams
277
22
Clearing Jams
Careful selection of appropriate print media and proper loading allow you to
avoid paper jams. See "Print Media Guidelines" on page 155 for more
information.
NOTE:
Before buying large quantities of any print media, it is recommended that
you try a sample first.
Avoiding Jams
• Use only recommended print media. See "Print Media Guidelines" on
page 155 for more information.
• See "Loading Print Media in the Multipurpose Feeder (MPF)" on page 166
and "Loading Print Media in the Priority Sheet Inserter (PSI)" on page 173
to load print media properly.
• Do not overload the print media sources. Ensure that the stack print
media height does not exceed the maximum height indicated by the line
with an arrow on each width guide.
• Do not load wrinkled, creased, damp, or curled print media.
• Flex, fan, and straighten print media before you load it. If a jam occurs
with print media, try feeding one sheet at a time through the MPF or the
PSI.
• Do not use print media that you have cut or trimmed yourself.
• Do not mix print media sizes, weights, or types in the same print media
source.
• Ensure that the recommended print side is face up when you insert the
print media.
• Keep print media stored in an acceptable environment. For more
information, see "Storing Print Media" on page 162.
• Do not remove the PSI during a print job.
• Ensure that all cables that connect to the printer are correctly attached.
• Over tightening the guides may cause jams.