Dell 1350 Color User Manual Download Page 38

Page: 38 / 328

Connecting Your Printer

Connecting Printer to Computer or Network

Direct Connection

A local printer is a printer attached to your computer using the USB cable. If

your printer is attached to a network instead of your computer, skip this

section and go to "Network Connection" on page

35.

USB Cable

The following operating systems support USB connection:

• Microsoft

Windows

• Microsoft Windows XP 64-bit Edition
• Windows Server

2003

• Windows Server 2003 x64 Edition
• Windows Server 2008
• Windows Server 2008 64-bit Edition
• Windows Server 2008 R2
• Windows Vista

• Windows Vista 64-bit Edition
• Windows 7
• Windows 7 64-bit Edition
• Mac OS

X 10.3.9/10.4.11/10.5/10.6

To attach the printer to a computer:

Ensure that the printer, computer, and any other attached devices are

turned off and unplugged from the power source/outlet.

Connect the smaller USB connector into the USB port at the back of the

printer.

Summary of Contents for 1350 Color









































































































































































































































































































































Search results

Summary of Contents for 1350 Color

Reviews:

Brands by name

Popular brands

Dell 1350 Color, User Manual

Search results

Summary of Contents for 1350 Color

Reviews:

Brands by name

Popular brands