manualshive.com logo in svg

Dell 1350 Color, User Manual

Share
Download
Dell 1350 Color User Manual Download Page 114

110

Dell Printer Configuration Web Tool

The 

Dell Printer Configuration Web Tool

 feature also allows you to change 

the printer settings and keep track of printing trends. If you are a network 

administrator, you can copy the printer settings to one or all printers on the 

network using your web browser.
To launch the 

Dell Printer Configuration Web Tool

, enter the IP address of 

your printer in your web browser.
If you do not know the IP address of your printer, print the printer settings 

page, or display the 

TCP/IP Settings

 page, which lists the IP address.

The Operator Panel

1

Press the 

 (Menu)

 button.

2

Ensure that 

Report/List

 appears, and then press the   button.

3

Ensure that 

Printer Setting

 appears, and then press the   button.

The printer settings page is printed.

4

Confirm the IP address next to 

IP Address

 under 

Network

 on the printer 

settings page.
If the IP address is 

0.0.0.0

, wait for a few minutes to resolve the IP 

address automatically, and then print the printer settings page again.
If the IP address is not resolved automatically, see "Assigning an IP Address 

(for IPv4 mode)" on page 39.

The Tool Box

 

NOTE: 

When the printer is connected to the USB port, TCP/IP Settings cannot be 

displayed.

 

NOTE: 

1

Click 

Start

 

All Programs

 

Dell Printers

 

Dell 1350cnw Color 

Printer

 

Tool Box

.

 

NOTE: 

When multiple printer drivers are installed on your computer, the 

Select Printer window appears. In this case, click the name of Dell 1350cnw 

Color Printer listed in Printer Name, and then click OK.

The 

Tool Box

 opens.

2

Click the 

Printer Setting Report

 tab.

3

Select 

TCP/IP Settings

 from the list at the left side of the page.

Summary of Contents for 1350 Color









































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands