Dell 1350 Color User Manual Download Page 279

Page: 279 / 328

Maintaining Your Printer

275

The Tool Box

NOTE:

Using the Tool Box, enter the values that you found in the color registration

chart to make adjustments.

Click

Start



All Programs



Dell Printers



Dell 1350cnw Color

Printer



Tool Box

NOTE:

The Select Printer window appears in this step, when multiple printer

drivers are installed on your computer. In this case, click the name of Dell

1350cnw Color Printer listed in Printer Name, and then click OK.

The

Tool Box

opens.

Click the

Printer Maintenance

tab.

Select

Color Registration Adjustment

from the list at the left side of the

page.
The

Color Registration Adjustment

page is displayed.

Select the value with the straight line, and then click the

Apply New

Settings

button.

Click the

Start

button next to

Print Color Regi Chart

The color registration chart is printed with the new values.

Adjust till all straight lines are at the value of 0. Show image of before and

after adjustment will help.

NOTE:

After printing the color registration chart, do not turn off the printer until the

printer motor has stopped running.

NOTE:

is not next to the straightest lines, determine the values and adjust the

printer again.

Summary of Contents for 1350 Color









































































































































































































































































































































Search results

Summary of Contents for 1350 Color

Reviews:

Brands by name

Popular brands

Dell 1350 Color, User Manual

Search results

Summary of Contents for 1350 Color

Reviews:

Brands by name

Popular brands