Dell 1350 Color User Manual Download Page 315

Page: 315 / 328

Appendix

311

Appendix

Dell Technical Support Policy

Technician-assisted technical support requires the cooperation and

participation of the customer in the troubleshooting process and provides for

restoration of the operating system, software program and hardware drivers to

the original default configuration as shipped from Dell, as well as the

verification of appropriate functionality of the printer and all Dell-installed

hardware. In addition to this technician assisted technical support, online

technical support is available at Dell Support. Additional technical support

options may be available for purchase.
Dell provides limited technical support for the printer and any Dell-installed

software and peripherals. Support for third-party software and peripherals is

provided by the original manufacturer, including those purchased and/or

installed through Software & Peripherals (DellWare), ReadyWare, and

Custom Factory Integration (CFI/DellPlus).

Online Services

You can learn about Dell products and services on the following websites:

www.dell.com
www.dell.com/ap

(Asian/Pacific countries only)

www.dell.com/jp

(Japan only)

www.euro.dell.com

(Europe only)

www.dell.com/la

(Latin American and Caribbean countries)

www.dell.ca

(Canada only)

You can access Dell Support through the following websites and e-mail

addresses:

• Dell Support websites

support.dell.com

Summary of Contents for 1350 Color









































































































































































































































































































































Search results

Summary of Contents for 1350 Color

Reviews:

Brands by name

Popular brands

Dell 1350 Color, User Manual

Search results

Summary of Contents for 1350 Color

Reviews:

Brands by name

Popular brands