manualshive.com logo in svg

Dell 1350 Color, User Manual

Share
Download
Dell 1350 Color User Manual Download Page 194

190

Printing

1

Click 

Start

 

All Programs

 

Dell Printers

 

Dell 1350cnw Color 

Printer

 

Tool Box

.

 

NOTE: 

The Select Printer window appears in this step, when multiple printer 

drivers are installed on your computer. In this case, click the name of Dell 

1350cnw Color Printer listed in Printer Name, and then click OK.

The 

Tool Box

 opens.

2

Click the 

Printer Settings Report

 tab.

3

Select 

Reports

 from the list at the left side of the page.

The 

Reports

 page is displayed.

4

Click the 

Printer Settings 

button.

The printer settings page is printed.

Printer Settings

Using the Operator Panel to Change Printer Settings

You can select menu items and corresponding values from the operator panel.
When you first enter the menus from the operator panel, you see an asterisk 

(*) next to a value in the menus. This asterisk indicates the factory default 

menu setting. These settings are the original printer settings.

 

NOTE: 

Factory defaults may vary for different countries.

When you select a new setting from the operator panel, an asterisk appears 

next to the setting to identify it as the current user default menu setting.
These settings are active until new ones are selected or the factory defaults are 

restored.
To select a new value as a setting:

1

Press the 

 (Menu)

 button.

2

Press the   or   button until the desired menu appears, and then press 

the  

button.

3

Press the   or   button until the desired menu or menu item appears, 

and then press the   button.
• If the selection is a menu, the menu is opened and the first system 

setting in the menu appears.

Summary of Contents for 1350 Color









































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands