Dell 1350 Color User Manual Download Page 233

Page: 233 / 328

Understanding the Printer Menus

229

Color Reg Adj

Purpose:

To specify whether to manually adjust color registration.

Color registration adjustments need to be made during the initial setup of the

printer or when the printer is moved to a different location.

NOTE:

The

Color Reg Adj

feature can be configured when

Auto Reg

Adj

is set to

Off

Values:

On*

Automatically adjusts color registration.

Off

Does not automatically adjust color registration.

Auto Correct

Automatically corrects color registration.

ColorRegi

Chart

Prints a color registration chart. The color registration chart prints a

lattice pattern of yellow, magenta, and cyan lines. On the chart, find

the values on the right side that are next to the line that is perfectly

straight for each of the three colors. If the value for this line is 0,

color registration is not needed. If the value for this line is any value

other than 0, specify the adjustment values under

Enter

Number

Summary of Contents for 1350 Color









































































































































































































































































































































Search results

Summary of Contents for 1350 Color

Reviews:

Brands by name

Popular brands

Dell 1350 Color, User Manual

Search results

Summary of Contents for 1350 Color

Reviews:

Brands by name

Popular brands