manualshive.com logo in svg

Dell 1350 Color, User Manual

Share
Download
Dell 1350 Color User Manual Download Page 134

130

Dell Printer Configuration Web Tool

Values:

Adjust Fuser

Purpose:

To specify the optimum temperature settings for printing for the fuser. To 

lower the temperature, set negative values. To increase, set positive values.
The default settings may not give the best output on all paper types. When 

the printed paper has curled, try to lower the temperature. When the toner 

does not fuse on the paper properly, try to increase the temperature.

 

NOTE: 

The print quality changes depending on the values you select for this item.

Values:

Plain

Sets the reference voltage setting for the transfer roller for plain 

paper within the range of -3 to 3.

Plain Thick

Sets the reference voltage setting for the transfer roller for thick 

plain paper within the range of -3 to 3.

Covers

Sets the reference voltage setting for the transfer roller for cover 

paper within the range of -3 to 3.

Label

Sets the reference voltage setting for the transfer roller for labels 

within the range of -3 to 3.

Coated

Sets the reference voltage setting for the transfer roller for coated 

paper within the range of -3 to 3.

Envelope

Sets the reference voltage setting for the transfer roller for 

envelopes within the range of -3 to 3.

Recycled

Sets the reference voltage setting for the transfer roller for recycled 

paper within the range of -3 to 3.

Plain

Sets the temperature settings for the fuser for plain paper within 

the range of -3 to 3.

Plain Thick

Sets the temperature settings for the fuser for thick plain paper 

within the range of -3 to 3.

Covers

Sets the temperature settings for the fuser for cover paper within 

the range of -3 to 3.

Summary of Contents for 1350 Color









































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands