PQRM5100 11 Ux Ix xx xx (PS)
20200205-V1
39
6. Type-in the energy / pulse ratio into the “ Pulse
equivalent” field.
7. Type-in into the “Pulse width [ms]” field the pulse width in
milliseconds.
8. Type-in into the “Tmin between pulses [ms]” field the
minimum time between the pulses in milliseconds.
9. Click on the “Save” button.
Warning!
At settings always take note the maximum power
on the power network. Improper settings may cause an
error state and you will see: “x output, frequency error”
message on the error page.
For setting proper values take note the following
expression:
Pulse width [ms] + T min. between pulses [ms] <
(Pmax * Pulse rate [pulse/Wh]) ÷ 3.6
Summary of Contents for PQRM5100 11 U I Series
