Datcon PQRM5100 11 U I Series, Instruction Manual

Page: 24 / 80

PQRM5100 11 Ux Ix xx xx (PS)
24
20200205-V1
6. Setting-up
6.1. First steps
Necessary tools
For setting-up you need:
• mini USB A (5 pin)-USB A cable
• PQRM_CAL.exe configuration software (version: 3.2.4.)
• PC with free USB port
Software
Easy to use the PQRM_CAL configuration software (free of
charge). Simple copy it into an optional folder, click on the
“Start” button and you can configure the instrument.
The program allows for setting the device and monitors the
measured network. You can with this program identify and
acknowledge the errors. The measured values are recorded
in a file. The program can communicate with one device at
a time!
Setting-up
1. Start the configuration program.
2. Connect the instrument with the USB cable to the PC
USB port and put it under supply voltage.
If you have already installed the USB serial card driver, your
computer's operating system automatically creates a serial
(COMx) port. In case of newly connected device appears in
the device operating system setup window. The supplied
CD-ROM you will find the driver for your device
(MCP2200.inf). If your computer has an Internet connection,
you can download the appropriate driver from the web.
4. Select the serial port for the device. Click the
„Communication" tab (right side of configuration program)
and click “Select com port”. In case of successful contacts
flashing the RX window green. If is the connection fails, the
RX window lights red, and the terminal window is "Timeout"
displayed.