Datcon PQRM5100 11 U I Series, Instruction Manual, Page: 50 / 80

PQRM5100 11 Ux Ix xx xx (PS)
50
20200205-V1
6.21. Analog output testing
Function
You can here testing the analogue outputs.
1. Click on the ”Configuration” tab
2. Inside of ”Configuration” tab click on the “Modul2” tab.
Contents this window depends on device construct.
3. Select the “Test value” from the “Select” pull-down menu.
4. Type-in into the “Range form” field the lower value of the
output scale.
5. Type-in into the “Range to” field the higher value of the
output scale.
6. Select the output current range (0-20 / 4-20 mA) from the
“Type” pull-down menu.
7, Type the testing value of the “Analogue output test value”
field, and click on the „Analog test” button. The test value
displayed on the analogue output.
Sequence of operations