PQRM5100 11 Ux Ix xx xx (PS)
34
20200205-V1
6.11. Sampling time setting
Function
The device sampling the necessary data for the calculation.
After sampling time (minimum 80 ms) the MCU of device
makes the calculations and updates the outputs. You can
increase the sampling time. It is possible to reduce the
fluctuation of measured values.
The sampling time modification change refresh time of the
instrument.
[Default: 80 ms]
1. Click on the ”Configuration” tab
2. Inside of ”Configuration” tab click on the “Measure
settings” tab.
3. Select the “Sampling time”
4. Click on the “Save” button.
Sequence of operations
Summary of Contents for PQRM5100 11 U I Series
