PQRM5100 11 Ux Ix xx xx (PS)
38
20200205-V1
6.14. Digital output, Energy pulse output settings
Function
The instrument has two open collector transistor pulse
outputs for transmitting export-import energy values for data
acquisition purposes. The frequency of the pulse outputs is
proportional to the measured energy.
Here you can set all of the parameters of the pulse outputs.
1. Click on the ”Configuration” tab
2. Inside of ”Configuration” tab click on the “Module 1” tab.
3. Select the “Energy pulse” functions from the “Function”
pull-down menu.
4. Select the output polarity from the “Polarity” pull-down
menu. When you select the “NO (Normally open)” state
then the output transistor is in off state when there is no
pulse on the output. When you select the “NC (Normally
closed” state then the output transistor is in on state when
there is no pulse on the output.
Sequence of operations
5. Select from the “Measured value” pull-down menu the
measured quantity what you are going to transmit.
Summary of Contents for PQRM5100 11 U I Series
