Datcon PQRM5100 11 U I Series, Instruction Manual

Page: 42 / 80

PQRM5100 11 Ux Ix xx xx (PS)
42
20200205-V1
6. Select the limit mode from the “Mode” pull-down menu:
“Under low limit”
The output changes into active state when measured value
becomes lower as the monitored value.
The output changes into inactive state when measured
value becomes higher as the monitored value and
hysteresis.
“Above higher limit”
The output changes into active state when measured value
becomes higher as the monitored value.
The output changes into inactive state when measured
value becomes lower as the monitored value and
hysteresis.