27
SP Series Info Central: Setup
Each bitmap has a sample image, to help you understand the orientation when you open it. See
for the steps to follow when changing one of these bitmaps.
If the side of the card for which you want customized blocking includes more than one blocking area, you need to
create all blocking areas in the bitmap file. Datacard ID Works® ID software allows you to specify the following
LandscapeBlockTopcoatBack.bmp
1013 by 638 pixels
3.37 by 2.125 inches
85.6 by 53.98 mm.
Blocks topcoat on the back of a
card with landscape orientation.
PortraitBlockPrintFront.bmp
638 by 1013 pixels
2.125 by 3.37 inches
53.98 by 85.6 mm.
Blocks printing on the front of a
card with portrait orientation.
PortraitBlockPrintBack.bmp
638 by 1013 pixels
2.125 by 3.37 inches
53.98 by 85.6 mm.
Blocks printing on the back of a
card with portrait orientation.
PortraitBlockTopcoatFront.bmp
638 by 1013 pixels
2.125 by 3.37 inches
53.98 by 85.6 mm.
Blocks topcoat on the front of a
card with portrait orientation.
PortraitBlockTopcoatBack.bmp
638 by 1013 pixels
2.125 by 3.37 inches
53.98 by 85.6 mm.
Blocks topcoat on the back of a
card with portrait orientation.
File name
Dimensions (Height by Width)
Comments
Summary of Contents for Datacard SP35
